We live in "The Instagram Age."

Kasarda's Law of Connectivity: "Every technology that circumvents distance electronically will increase our desire to travel it ourselves.

Interacting with people, places or products ONLINE makes us want to see them OFFLINE.

📸

हिमालय पर्वत की एक बड़ी पवित्र गुफा थी।उस गुफा के निकट ही गंगा जी बहती थी।एक बार देवर्षि नारद विचरण करते हुए वहां आ पहुंचे।वह परम पवित्र गुफा नारद जी को अत्यंत सुहावनी लगी।वहां का मनोरम प्राकृतिक दृश्य,पर्वत,नदी और वन देख उनके हृदय में श्रीहरि विष्णु की भक्ति अत्यंत बलवती हो उठी।

और देवर्षि नारद वहीं बैठकर तपस्या में लीन हो गए।इन्द्र नारद की तपस्या से घबरा गए।उन्हें हमेशा की तरह अपना सिंहासन व स्वर्ग खोने का डर सताने लगा।इसलिए इन्द्र ने नारद की तपस्या भंग करने के लिए कामदेव को उनके पास भेज दिया।वहां पहुंच कामदेव ने अपनी माया से वसंतऋतु को उत्पन्न कर दिया।

पेड़ और पौधों पर रंग बिरंगे फूल खिल गए और कोयलें कूकने लगी,पक्षी चहकने लगे।शीतल,मंद,सुगंधित और सुहावनी हवा चलने लगी।रंभा आदि अप्सराएं नाचने लगीं ।किन्तु कामदेव की किसी भी माया का नारद पे कोई प्रभाव नहीं पड़ा।तब कामदेव को डर सताने लगा कि कहीं नारद क्रोध में आकर मुझे श्राप न देदें।

जैसे ही नारद ने अपनी आंखें खोली, उसी क्षण कामदेव ने उनसे क्षमा मांगी।नारद मुनि को तनिक भी क्रोध नहीं आया और उन्होने शीघ्र ही कामदेव को क्षमा कर दिया।कामदेव प्रसन्न होकर वहां से चले गए।कामदेव के चले जाने पर देवर्षि के मन में अहंकार आ गया कि मैने कामदेव को हरा दिया।

नारद फिर कैलाश जा पहुंचे और शिवजी को अपनी विजयगाथा सुनाई।शिव समझ गए कि नारद अहंकारी हो गए हैं और अगर ये बात विष्णु जी जान गए तो नारद के लिए अच्छा नहीं होगा।ये सोचकर शिवजी ने नारद को भगवन विष्णु को ये बात बताने के लीए मना किया। परंतु नारद जी को ये बात उचित नहीं लगी।

Make them irrelevant > Hold a grudge

Holding a grudge is the easy thing to do.

But holding a grudge is not the right thing to do.

A grudge puts poison in your body & rewires your subconscious mind.

You consume the poison & destroy your reality while your attacker sleeps like a baby.

THE LAST PRINCESS OF LAHORE - BAMBA DULEEP SINGH (1869 - 1957)

Thread

Post partition, every morning a weak old woman would board the Model Town bus service headed to the city. The conductor never asked her for money or he would invite anger of the last Queen of Punjab.

1/n

Princess Bamba Sutherland, the eldest daughter of Maharaja Duleep Singh and grand-daughter of Maharaja Ranjit Singh, was born on Sep 29, 1869, in London.

Duleep Singh, the last Maharaja of Punjab was taken away to England by British after annexing Punjab.

2/n

Since he was still a child he was forcibly converted to Christianity and made to adopt British values in order to prevent him from ever thinking about regaining Punjab.

He was also kept away from his mother Maharani Jindan.
When he finally met his mother years later...

3/n

...he was told about his lost kingdom and religion after which he decided to reclaim it from British treachery.
During his struggle he married and had six children, 3 sons & 3 daughters from the 1st marriage.

Bamba was the most colorful character among 6 and was a rebel...
4/n

...like her father and daring like her Grandfather Ranjit Singh. She married Col Sutherland who later became principal of King Edward Medical College.

When she got permission to bring her grandmother Maharani Jindan's ashes to Lahore in 1924, she saw a huge crowd gathered...
5/n

Read through a forum thread on Chastity Mansion to see who is talking about the Edge-o-Matic and figure out what more to address regarding frequent questions, as well as scout out user feedback. Here's some thoughts you can carry back to the forums!

My website doesn't have any product reviews, but people scatter them everywhere else in forums, tweets, xtube vids, etc.

If you ARE a previous customer, and you like the thing, can you drop a review on my site to help others?

The price is steep, but that's the amount of coins I calculated to make these. I have several spreadsheets calculating every expense involved with this project.

The current cost sustains production and development of new tech, and is helping create jobs. We are 2 people now!!

It IS 3D printed, because injection molding is orders of magnitude more expensive for the initial tooling, and I am still making small revisions to the enclosures.

Injection molded plastics are a six thousand dollar commitment for fifteen cent parts. Great for mass mfg.

Also, if you didn't know, 3D printing technology allows for some shapes which would be difficult, expensive, or impossible on injection molding or milled parts!!

Undercuts, which I use in this design, require special lifters to mold that cost a tremendous fortune.